Tony White, of White Fencing and designer of Revolution Postdrivers, is focused on efficient installation systems.
Using a Revolution Netmaster in Tony’s fencing business has impressed Tony with regards to speeding up the process of rolling out and tensioning off netting.
“We have used it in all sorts of netting applications, including the recent use on a barrier fence on a 4WD racetrack, making short work of putting netting on, where bottom wires were several metres above ground level”.
Customers have asked for a Double-sided Netmaster, which Revolution has recently released. The ability to roll out the netting from either side is an advantage over the Single-sided Netmaster and allows for more versatility. Says Tony, “You can pull either side, left or right, or both at once. Tare weight is light, only 380 kilos.”
Being able to be mounted onto a front-end loader or skid steer, the Revolution Netmaster is self-loading, side dispensing, and hydraulically clamps and strains/tensions from the tractor/ skid steer seat via a cam lock clamping system, allowing the opportunity to staple off in one pass under tension, using the Netmaster.
The Double-sided Netmaster will take standard height (900mm high) or deer height (1500/1900mm high) rolls. It will carry two x 500 metre rolls at a time.
Mark Brooker from Kaikoura recently purchased a Double-sided Netmaster and Revolution Telescopic SS post driver. Mark comments, “I’ve been using both sides a fair bit, [it’s] been really good for me to use, as we’re doing a lot of races and deer fences up against trees and old lines; the Double-sided Netmaster really speeds everything up.”
Supplied by:
Published in WIRED issue 76/March 2025 by Fencing Contractors Association NZ
Read WIRED online
Follow us on Facebook
© Fencing Contractors Association NZ (FCANZ)
